Back to Catalog
Pharmaceutical Chemistry
Injection Substances (Resins & Gels)
Injection substances are specialized low-viscosity formulations (polyurethane, epoxy, or acrylate) designed to fill cracks, voids, and joints in concrete and masonry structures. Due to their high penetrating power, they ensure complete sealing, restore the structural integrity of the object, and create a reliable barrier against the aggressive impact of groundwater.
Applications
Foundation Waterproofing: Stopping active water leaks and sealing expansion joints in basements and parking garages.
Structural Strengthening: Filling structural cracks in bridges, dams, and columns to restore load-bearing capacity.
Tunnel Construction: Creating curtain grouting behind tunnel linings and stabilizing unstable soils.
Reservoir Repair: Sealing joints and cracks in drinking water tanks and wastewater treatment facilities.
Key Advantages
High Penetration: Low viscosity allows the material to penetrate even the smallest micro-cracks (down to 0.1 mm).
Instant Water Stop: Special foaming agents expand up to 30 times their volume within seconds upon contact with water.
Durability and Elasticity: Maintains a tight seal even under dynamic loads and subsequent structural deformations.
Chemical Resistance: Complete resistance to salts, alkalis, and aggressive groundwater.
Storage & Transportation
- Store in a dry, closed, and well-ventilated warehouse in original factory packaging at temperatures between +5°C and +25°C.
- Must be protected from direct sunlight, precipitation, and freezing of components.
- Can be transported by all types of covered vehicles, following regulations for the transport of chemical goods and protecting the containers from mechanical damage.
Frequently bought together
Technical Specifications
Viscosity (at +25°C):
50 – 250 mPa·s
Density:
1.02 – 1.15 g/cm³
Pot Life:
15 to 60 minutes (adjustable)
Application Temperature:
+5°C to +35°C
Compressive Strength:
up to 60 MPa (for epoxy systems)
Supply info
- Supplied in metal canisters or plastic pails as sets (Component A + Component B).
- Standard packaging: 5 kg, 10 kg, 20 kg, and 25 kg.
- Shipped on pallets wrapped in stretch film for protection during transit.